Table of Contents
Advertisement
Getting Started
This document contains information about installing and
configuring the Adaptec LAN adapters. These adapters are
engineered for high-speed networking in IEEE 802.3 Ethernet and
IEEE 802.3u Fast Ethernet networks.
Procedures in this document describe installing the adapter,
installing and configuring the adapter drivers, and troubleshooting
the Adaptec LAN adapters.
System Requirements
The minimum system requirements for using the Adaptec LAN
adapters and for running the EMDIAG Diagnostics Utility are as
follows:
System Component
Requirements
PCI adapter
Available bus mastering PCI slot; most recent PCI
system BIOS recommended
Quartet adapter
System BIOS supporting PCI-to-PCI bridge chip
with Windows NT
EMDIAG program
MS-DOS 3.3 or later
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
1
Page: 1-1
ECN Date: 5/97
1-1
Advertisement
Table of Contents
