Windows For Workgroups Driver Parameters - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

the bottom of the Setup window allows you to choose between
NDIS and ODI.
9
After making any driver setup changes, select Close to go back
to the previous window. Click OK again to exit from the
Network Driver Install window. At this point, any necessary
drivers will be copied to your system from the Windows for
Workgroups and Adaptec diskettes.
10
You must reboot before your new driver takes effect.

Windows for Workgroups Driver Parameters

See \readme\wfw.txt for supplemental installation instructions and
descriptions of additional NDIS 3.0 keyword parameters.
See \readme\ndis.txt for supplemental installation instructions and
descriptions of additional NDIS 2.0 keyword parameters.
See \readme\dosodi.txt for supplemental installation instructions
and descriptions of additional DOS ODI keyword parameters.
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Installing Network Drivers
4-21
Page: 4-21
ECN Date: 5/97