Ibm Os/2 Smp; Installing With Lan Server - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

PCI Ethernet and Fast Ethernet Adapters

IBM OS/2 SMP

Note:
Consult the \readme\os2.txt file for the latest driver
information and installation instructions. Some procedures
or information may have changed or may not have been
available when this user's guide was printed.
The ANA-6944A/TX, ANA-6901, and the ANA-6911A/TX OS/2
drivers support OS/2 SMP. If you choose to run an older or different
version of OS/2, you may need to obtain your protocol or client files
from third-party sources.
The ANA-6944A/TX, ANA-6901A, and the ANA-6911A/TX OS/2
drivers support connections to all of the following network operat-
ing systems:
Novell NetWare
OS/2 Peer Client
IBM LAN Server
IBM LAN Requestor
Windows NT
Follow the instructions below to install the ANA-6944A/TX,
ANA-6901, and the ANA-6911A/TX OS/2 drivers using OS/2
SMP. If you are using an older version of OS/2, refer to the installa-
tion documentation that came with your OS/2 software.

Installing with LAN Server

Use this installation procedure when installing for the IBM LAN
Server and IBM LAN Requestor environments.
1
In the IBM LAN Services window, double-click the OS/2 LAN
Services Installation/Configuration icon.
2
Select Other Adapter to add a single port adapter. Repeat this
three times for the ANA-6944A/TX to add the other three
ports as separate devices.
3
Enter the full path name for the drivers as follows:
a:\ndis.os2
4-24
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Page: 4-24
ECN Date: 5/97