Diagnostic Leds - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

PCI Ethernet and Fast Ethernet Adapters

Diagnostic LEDs

Diagnostic Light Emitting Diodes (LEDs) provide information about
link status and network activity. See the table below for details on
each LED function.
na
na
ls
ANA-6901 Combo*
na
na
ls
SC Fiber Optic* ST Fiber Optic*
*10Mbps and 100Mbps single speed adapters provide only 1 link status and 1 netwo
Link Status (L.S.)
LED lights when the adapter's driver is loaded, and indicates that an
electronic link exists between the adapter device and repeater or switch.
Speed Ports
10 Mbps RJ-45
100 Mbps RJ-45
Network Activity (N.A.)
LED lights up to signal the presence of incoming or outgoing traffic.
Speed Ports
10 Mbps RJ-45, BNC, AUI
100 Mbps RJ-45, BNC, AUI
Speed100 (ANA-6911A/TX)
The Speed100 LED is green. When
indicates 10Mb/s.
3-6
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
ls, p1
ls, p2
na, p1
na, p2
ls
ls
na
na, p3
ls, p3
na, p4
ls, p4
Quartet ANA-6911A/TX
ls
na
ls
Ultimate Combo
Color
Green, with the exception of the Quartet and the
Ultimate Combo—where it is yellow.
Green. The LED blinks on T4 adapters.
Color
Yellow
Yellow
, it indicates 100Mb/s, when
ON
Page: 3-6
ECN Date: 5/97
Speed100
, it
OFF