Editing Driver Parameters - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

3
Specify the type of network adapter you are using, select
Choose Other Adapter.
4
Enter the source for the Network Adapter Driver Disk as
follows:
a:\ndis.os2
5
Select OK.
6
OS/2 displays a Drivers Found message to confirm your
choice.
7
Specify Ethernet as the type of LAN and select OK.
8
Select OK twice more to confirm your choice.
9
Continue through the rest of the OS/2 installation, following
the on-screen instructions.

Editing Driver Parameters

See \readme\ndis.txt for complete information about driver parameters.
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Installing Network Drivers
4-27
Page: 4-27
ECN Date: 5/97