Snmp Management Station - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

PCI Ethernet and Fast Ethernet Adapters
25
Click Continue. The Duralink Setup by Adaptec dialog box
appears.
26
If SNMP has not been set up on this computer you will receive
the following Setup Message: Install the NT SNMP service
and use configure option to configure Server related MIBs.
Click OK.
27
Click Close to close the Network dialog box. The protocol and
service binding information for the primary and backup ports
will be written.
28
Remove any floppy disks and click Yes to restart your
computer now.
Note:
You can now attach cables from both adapters to a
common hub.

SNMP Management Station

The following MIB files must be compiled on the SNMP Manage-
ment station to manage the ANA-6911:
ADPTDMI.MIB - Adaptec Ethernet DMI/SNMP MIB
FAILOVER.MIB - Adaptec Duralink Failover MIB
4-18
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Page: 4-18
ECN Date: 5/97