Configuring The Sco Openserver Driver - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

5
Extract the driver files, as follows:
tar -xvf -d adaptec\empci.tar
6
Enter the Software Manager window, as follows:
custom
7
On the Software menu, select Install new.
8
Select the host (computer) you want to install from, and
click Continue. The default host is the computer on which you
are working.
9
In the Select Media dialog box select media images and
click Continue.
10
Enter the directory path for the directory containing the media
images (/ adaptec ), and click OK.
11
Select Full installation, and click OK.
The program displays the progress of the installation, and displays a
message box telling you when you are finished. If the installation
was successful, the driver name will be listed in the Software Man-
ager window.

Configuring the SCO OpenServer Driver

Once the driver is installed, you can configure the driver for the
ANA-6911A/TX, ANA-6901, or the ANA-6944A/TX.
1
In the System Administration window, double-click the
Networks icon.
2
Open the Network Configuration Manager.
3
On the Hardware menu, select Modify Hardware
Configuration.
4
Make the necessary changes in the Network Driver
Configuration window, and select OK.
5
On the Hardware menu, select Exit.
6
Relink, and reboot the system.
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Installing Network Drivers
4-29
Page: 4-29
ECN Date: 5/97