Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual page 8

PCI Ethernet and Fast Ethernet Adapters
Checking the Connection with EMDIAG 3-7
4 Installing Network Drivers
Installation Instructions and Optional Keywords 4-1
Driver Naming Conventions 4-1
Full Duplex Support 4-1
NetWare 4-3
Installing and Configuring the Standard Driver for
NetWare 4.x 4-3
Using the INETCFG utility 4-3
Installing the Duralink Driver for NetWare 4.x 4-5
Using the INETCFG utility 4-5
Enabling SNMP Agents 4-6
Manual Installation 4-7
DOS ODI 4-9
Automated NetWare Client Installation 4-9
Manual Installation 4-9
DOS ODI Parameters 4-10
Windows NT 4.0 4-11
Installing the Standard Driver for Windows NT 4.0 4-11
Remove Existing Adaptec Ethernet Drivers 4-12
Adding Standard Drivers 4-12
Configuring the Drivers 4-13
Installing the Duralink Driver for Windows NT 4.0 4-14
Remove Existing Adaptec Ethernet Drivers 4-15
Adding Duralink Drivers 4-15
Configuring the Drivers 4-16
Configuring the Primary and Backup Ports 4-17
SNMP Management Station 4-18
Windows 95 4-19
Windows 95 Installation for PCI 4-19
Windows 95 Driver Parameters 4-19
Windows for Workgroups 4-20
Windows for Workgroups Driver Parameters 4-21
viii
PCI Ethernet and Fast Ethernet Adapters
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Page: viii
ECN Date: 5/97