Ndis 2.0; Installing With Lan Manager - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

PCI Ethernet and Fast Ethernet Adapters

NDIS 2.0

Note:
Consult the \readme\ndis.txt file for the latest driver
information and installation instructions. Some procedures
or information may have changed or may not have been
available when this user's guide was printed.
The NDIS 2.0 driver for DOS is in the \ndis.dos directory. The NDIS
2.0 driver for OS/2 is in the \ndis.os2 directory. The Microsoft LAN
Manager installation file is in the \mslanman.dos directory tree.
Here is a partial list of products that use the NDIS driver:
Microsoft LAN Manager
Artisoft Lantastic
IBM DOS LAN Requester
IBM OS/2 Warp Connect
DEC PATHWORKS for DOS
SunSoft PC-NFS
Banyan VINES Client
Various brands of TCP/IP
The DOS NDIS driver is compatible with DOS memory managers
such as emm386 and can be loaded into high memory. In addition,
the driver is compatible with Windows 3.0 and later. The NDIS 2.0
driver will also work with any other OS that complies with NDIS 2.0
specifications.

Installing With LAN Manager

Follow the instructions below to install the NDIS driver for LAN
Manager, OS/2 Warp, and others.
1
Boot your system.
2
Run your network operating system's setup program
according to the documentation provided with your network
operating system software.
3
When prompted, insert the driver diskette in drive A.
4
Enter information as required.
5
Exit your network operating system's setup program.
4-22
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Page: 4-22
ECN Date: 5/97