Ana-6911/T4 And Ana-6911/T4 Combo Pci - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

ANA-6911/T4 and ANA-6911/T4 Combo PCI

Bus Interface
Hardware Interrupts
Base I/O or Memory
Address
Power Requirements
Environmental
Temperature
Relative Humidity
Altitude
Network Interface
Standards
Certifications
Network Speeds Supported
Network Connectors
Physical Dimensions
Diagnostic LEDs
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
Adapter Specifications
PCI 32-bit bus master
PCI interrupt A, supports shared
interrupts
Assigned by BIOS
+5 volts @ 1.5 Amp. max
0× C to 50× C
5% to 85% non-condensing
3000m maximum
IEEE 802.3 10BASE-2
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-T4
FCC Class B
CE Class B
10 Mb/s
20 Mb/s Full Duplex (PCI only)
100 Mb/s
RJ-45 female, BNC
5.075" x 3.9" (conforms to PCI Short
Card specification)
Link status (green) normally on, or
blinking for 100 Mb/s
Network activity (yellow) on when
activity detected
Page: A-5
ECN Date: 5/97
A-5