Ana-6904 And Ana-6904Bnc Quartet - Adaptec PCI Ethernet and Fast Ethernet Adapters User Manual

PCI Ethernet and Fast Ethernet Adapters

ANA-6904 and ANA-6904BNC Quartet*

Bus Interface
Hardware Interrupts
Base I/O Addresses
Ethernet Node ID Number
Power Requirements
Environmental
Operating Temperature
Humidity
Altitude
Network Interface
Standards
Certifications
Network Speeds Supported
Network Connectors
Physical Dimensions
Diagnostic LEDs
A-2
PCI Ethernet and Fast Ethernet Adapters User's Guide
Stock Number: 511472-00, Rev. A
Print Spec Number: 496708-00
Current Date: 5/5/97
PCI, 32-bit bus master
PCI INTA, supports shared interrupts
Assigned by BIOS
000092xxxxxx
+ 5 volts @ 2 Amp. max. (TP)
+ 5 volts @ 3.5 Amp. max. (BNC)
0× C to 50× C
5% to 85% non-condensing
3000m maximum
Ethernet IEEE 802.3 10BASE-T
Ethernet IEEE 802.3 10BASE-2
FCC Class A
CE A
10 Mb/s
20 Mb/s Full Duplex (RJ-45 only)
RJ-45 female (4), or BNC (4)
9.75" x 4" (conforms to PCI Long Card
specification)
Link status (green) normally on for
RJ-45 connector
Network activity (yellow) on when
activity detected
Page: A-2
ECN Date: 5/97