Instructions On Commissioning - Festo CPX Electronic Manual

5. Multi I/O modules
5.4

Instructions on commissioning

Module parameters
Monitoring the CPX module
Monitoring short circuit in the
sensor supply
Monitoring the CPX module
Monitoring short circuit in the
outputs
Monitoring the CPX module
Monitoring V (undervoltage in
OFF
load supply outputs)
Reaction after short circuit
Reaction after short circuit in the
sensor supply
Reaction after short circuit
Reaction after short circuit in the
outputs
1)
m = Module number (0...10),
x = Channel number (0...7)
2)
Default setting
3)
Detailed description see "Diagnosis," Tab. 5/8
Tab. 5/5: Parameters of the multi I/O modules – Part 1
5-10
The reaction of the I/O modules can be parametrized. The
table below gives an overview of the parameters.
Further information on parametrizing can be found in the
system manual or in the manual for the field bus node.
Parameters of the multi I/O module CPX-8DE-8DA
Function no.
1)
4828 + m * 64
1)
4828 + m * 64
1)
4828 + m * 64
1)
4828 + m * 64 + 1
1)
4828 + m * 64 + 1
Bit Value range
0 0 = Inactive
2)
1 = Active
1 0 = Inactive
2)
1 = Active
2 0 = Inactive
2)
1 = Active
0 0 = Leave voltage
switched off
1 = Switch voltage on
2)
again
1 0 = Leave voltage
2)
switched off
1 = Switch voltage on
3)
again
Festo P.BE-CPX-EA-EN en 0112NH