Festo CPX Electronic Manual page 46

2. Overview and connenction technology I/O modules
2-10
Sub-base CPX-AB-4-M12x2-5POL
Please note
In order that the completely fitted modules with sub-base
CPX-AB-4-M12x2-5POL comply with protection class IP65:
Use plugs and cables from the Festo range for connect-
•
ing sensors and actuators (see Appendix A.8).
Tighten the union nuts of the plugs by hand.
•
Seal unused sockets with protective caps type ISK-M12
•
(Accessories).
Screening plate type CPX-AB-S-4-12
A screening plate is in preparation for sub-base CPX-
AB-4-M12x2-5POL. The electromagnetic compatibility can be
improved with screening plates, e.g. in environments heavily
subjected to interference or for analogue signals.
Sub-base CPX-AB-8-M8-3POL
Please note
In order that completely fitted modules with sub-base
CPX-AB-8-M8-3POL comply with protection class IP65:
Use plugs and cables from the Festo range for connect-
•
ing sensors and actuators (see Appendix A.8).
Tighten the union nuts of the plugs by hand.
•
Seal unused sockets with protective caps type ISK-M12
•
(Accessories).
Festo P.BE-CPX-EA-EN en 0112NH