Festo CPX Electronic Manual page 47

2. Overview and connenction technology I/O modules
Festo P.BE-CPX-EA-EN en 0112NH
Sub-base CPX-AB-8-KL-4POL
The completely fitted sub-base CPX-AB-8-KL-4POL complies
with protection class IP20.
Specification of the cable terminals:
– Cable cross-section:
– max. current:
– Insulation removed:
Permitted copper conductors:
– Single wire, multi-wire, fine wire, also with zinc-plated
individual cores
– Fine wire, strands compressed
– Fine wire with core end sleeves (sealed against gas
crimped on *)
– Fine wire with pin cable socket (sealed against gas
crimped on *)
*) If necessary use next smaller cross-section.
Fitting and removing the cables
Please note
To ensure reliable contact, connect only one conductor
•
per spring terminal.
Insert only cables into the terminal opening. The ter-
•
minal will be damaged if a screwdriver is inserted into
the opening.
When fitting and removing the cables:
1. Press the screwdriver with a light rotary movement in the
direction of the centre part into the unlocking opening
(see Fig. 2/3).
The cable terminal will then be unlocked.
2
0.08...1.5 mm
1.5 A
5...6 mm
2-11