Fitting - Festo CPX Electronic Manual

2. Overview and connenction technology I/O modules
2.3

Fitting

2-16
Warning
Undesired movement of the connected actuators and
uncontrolled movements of loose tubing can cause injury
to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
– the compressed air supply
– the operating and load voltage supplies.
Caution
Modules may be damaged if they are not handled
correctly.
Do not therefore touch any contacts.
•
Observe the regulations for handling electrostatically
•
sensitive components.
Discharge yourself electrostatically before fitting or re-
•
moving components in order to protect the components
against discharges of static electricity.
Before the fitted CPX terminal can be extended or converted,
it must first be dismantled. Instructions on this can be found
in the CPX system manual.
In order that sub-bases or electronic modules can be fitted or
removed, the fitted CPX terminal can remain mounted. This
also applies to the plugs and cables on the sub-base.
Festo P.BE-CPX-EA-EN en 0112NH