Error Treatment And Parametrizing - Festo CPX Electronic Manual

3. Input modules

3.5.3 Error treatment and parametrizing

Festo P.BE-CPX-EA-EN en 0112NH
The following diagram shows the error treatment in the input
modules. Further registering and display of the faults can be
suppressed as desired with the appropriate module para-
meters, represented in the diagram as switches. The para-
meters are described in section 3.4, Tab. 3/12.
Error message to
field bus node
Monitoring
0 1
Short circuit
at sensors
Error no. 2
Short circuit/
overload in
sensor supply
1 Module parameters
(switch position represented = default setting)
2 Module-specific faults
Fig. 3/2: Principle of error treatment and parametrizing in
the input modules
Module
error LED
1
2
3-21