2. Overview and connenction technology I/O modules
Festo P.BE-CPX-EA-EN en 0112NH
Sub-base CPX-AB-4-HARX2-4POL
Please note
In order that completely fitted modules with sub-base
CPX-AB-4-HARX2-4POL comply with protection class IP65:
Use plugs type SEA-GS-HAR-4POL from the Festo range
•
(consisting of union nut, strain relief and splicing ring)
for connecting sensors and actuators.
Tighten the union nuts of the plugs by hand.
•
Seal the unused connecting sockets with protective
•
caps from Harting (see Accessories, Appendix A.8).
Specifications of cables for the sub-base
CPX-AB-4-HARX2-4POL:
–
Cable cross-section:
–
Strand cross-section:
–
Insulation material:
–
Insulation thickness:
–
Core diameter:
–
Cable outer diameter:
2
0.25...0.5 mm
up to 0.1 mm
PVC/PUR/PE
max. 1.6 mm
1.2... 1.6 mm
4.0...5.1 mm
2-13