Sfptool - SMART Embedded Computing MC1600 Installation And Use Manual

Software Configuration
BCM.0> mir dest destroy id=0x3c000000
This release includes a shell script which allows the user to execute BCM utility commands
without having to enter and exit the program. This can be useful if a BCM commands need
to be scripted, for example, from the Linux command line:
# bcmui.sh port xe0 autoneg=on
5.2.1.4

sfptool

Included with an Extreme Edge Server installation is a CLI utility called sfptool. This utility
allows for the information status display and reconfiguration of the front panel SFP
modules. Here is the sfptool help display:
[root@mc1600-c1 ~]# sfptool -h
Usage: sfptool [-p <port>] [-spdvhrtw]
Where:
-h
-s
-p
-d
-r
-t
-v
-w
Display options include:
"-s" - display SFP status for all 5 front panel ports.
"-d" - dump register content for a specific port.
Reconfiguration options include:
"-r" - enable or disable rate select for multi-speed SFP modules.
"-t" - enable or disable the transmitter for a specific port.
"-w" - modify SFP register values, for advanced debug only.
108
Help
Run SFP Port Scan
SFP Port Number: one-based number (range 1..5)
Dump SFP Registers for given <port>
(e.g., sfptool -p 3 -d)
Enable(1) or disable(0) rate select pin for a given port.
Enable(1) or disable(0) transmitter for a given port.
Verbose mode.
Write bytes to SFP, parm='page/offset/number/value'.
MC1600 Extreme Edge Server Installation and Use (6806870A02B)
Software Configuration