About this Manual
Overview of Contents
This manual is divided into the following sections.
Safety Notes on page 15
operating the product.
Notice de Sécurité on page 25
Sicherheitshinweise on page 37
Chapter 1, System Overview on page 49
features and functionality. This chapter includes detail on front panel interfaces, cooling,
grounding, and the server's base board. There is also information about the Baseboard
Management Controller (BMC) and ordering information.
Chapter 2, Site Preparation on page 83
Extreme Edge Server, safety precautions, and requirements for the product. Included are
the environmental and power requirements, mounting options, cooling considerations,
acoustic noise control, and dimensions and weight of the product.
Chapter 3, FRU Installation on page 89
cards and details of the SFP/SFP+ modules.
Chapter 4, System Installation on page 91
the MC1600 Extreme Edge Server in a rack or cabinet. It also gives information and
procedures for grounding, powering up and down, and disconnecting the server from the
power feed.
Chapter 5, Software Configuration on page 97
firmware are presented in this chapter. CPU boot information and information on the Basic
Blade Services (BBS) which includes utilities for updating firmware and configuring
switches are described. System management and monitoring is discussed via the BMC
along with the standard IPMI implementation as well as some custom OEM commands.
Appendix A, Related Documentation on page 123
related to this product.
MC1600 Extreme Edge Server Installation and Use (6806870A02B)
provides the safety information that should be observed while
provides a French translation of the safety notes section.
provides a German translation of the safety notes section.
describes the MC1600 Extreme Edge Server's
provides information on unpacking the MC1600
describes the installation and removal of PCIe
provides instructions for installing and removing
details about the preinstalled software and
provides information on documentation
11
Need help?
Do you have a question about the MC1600 and is the answer not in the manual?