Table of Contents
Advertisement
Show contents of BIOS firmware image:
Verification of BIOS image:
Upgrade Operation
Upgrade Operation uploads the firmware image to the device. Before the upload process,
the firmware image is validated first and the FCU verifies if the image is applicable to the
firmware device.
To upgrade BIOS, use the following command:
$ fcu –uf <BIOS image>.fri
MC1600 Extreme Edge Server Installation and Use (6806870A02B)
Software Configuration
101
Advertisement
Table of Contents
Need help?
Do you have a question about the MC1600 and is the answer not in the manual?