Advertisement
Push the mounted freewheel unit on the
pinion shaft D609.
Add a washer shim 10x16x0,2 033.
Push the lower bearing block D612 with
the flanged bearing D70 onto the shaft
showing with the flanged side of the ball
bearing to the freewheel unit. Note the dif-
ferent inner contour of the bearing block.
The rounded side is the longer side that is
on the left side (view in flight direction).
Push the upper bearing block D613 (with
the cover plate) and the flanged bearing
D70 onto the upper pin of the pinion shaft
showing the flange of the bearing to the
toothed gear wheel.
Advertisement
