Advertisement
Attach two hex bolts M3x12 D119 in the
rotorhub D452 using Loctite.
Push the bladegrips D635 on so that the
cross holes in the grips are corresponding
with the holes of the threaded bush 509.
The fitting of the grips is quite narrow. A
light warming up of the grips with a hair-
dryer does help.
Add two lens screws M3x6 D199 using
Loctite. Before tightening push both blade-
grips in outside direction to eliminate play
between screws and crossholes of the
bladegrips.
Add on the blade grip arms a hex bolt
M3x8 D197 and a hex bolt M3x14 D198
and apply Loctite on the threads.
Advertisement
