minicopter Diabolo 600 Manual page 22

Parts overview of the landing gear with
aluminum skids (alternatively).
Two landing bows D549a/b are attached
on the landing bow holders D627 with four
hex bolts M3x8 VA D82 using Loctite. Note
that the rear landing bow is higher than
the front landing bow and that the front
edge is straight (the rear edge is angled
on a length of about 60mm).
Attach the skid plates D648 with four lense
screws M3x8 024 and nuts M3 D547 using
Loctite.
Bag 6: Swashplate and Linkage
Parts overview