Advertisement
Push the holder pin D653 in and check for
easy moving. Otherwise adjust the parallel
position of the eyelets on the battery plate.
Attach the Tenax holder D460 with two
hex bolts M3x12 D119 and lock nuts M3
008s on the lower right frame D625.
Mount two battery rails D437 with four
countersunk screws M3x6 975 each and
nuts D547on the lower frames using Locti-
te, but still keep them loose.
Push the battery plate D652 into the slot
and check for clearance. After correcting
the best position of the rails in the long
holes of the lower frames tighten the
screws.
Advertisement
