Advertisement
Attach the rear canopy holder D618 with
a lense screw M3x8 024 on the upper
right frame D602 as shown. Now the gyro
platform D621 will be mounted using four
countersunk screws M3x6 974 and Loctite.
Put the vertical frame stiffener D623 into
the slot of the right frame and check for
clearness, eventually file the edges a bit.
Check the same on the slot of the upper
rear frame D601.
View of the mounted mechanic.
Attach the second rear canopy holder
D618 on the upper left frame D601 with a
lense screw M3x8 024 using Loctite.
Advertisement
