Advertisement
Fully attach two shortened ball joints 385
on the threads of the knuckle joints 382 of
the tailslider 1475. They should be positi-
oned so that the numbers on the ball joint
should show like placed in the picture on
the upper joint to the left side and on the
lower to the right.
The bellcrank D49 is attached with a ball
guide bush D288 and a special lense
screw 092 using Loctite.
On the free end of the screw a nut D547
will be attached using Loctite.
Push the first ball joint on one joint bolt
and check the clearance.
Advertisement
