Advertisement
The battery plate D651 is attached with
ten countersunk screws M3x6 975 on the
frame connectors D626. The two front and
the rear frame connector are attached out-
side with O-ring holders D57 and hex bolts
M3x16 D86. The battery, f.e. 10s/4000, will
be mounted with four O-rings D127. For
protecting the O-rings the lower front area
and the rear cutouts of the lower frames
should be rounded a bit.
The third O-ring mounting point is at-
tached on the left side with a O-ring holder
D57 and a hex bolt M3x14 D85 using Loc-
tite. For the connection on the right side
as shown in the picture a hex bolt M3x16
D86, a O-ring holder D57 and a spacer
bush 2mm D79 using Loctite are attached.
Battery mounting set „battery tray for
10-12s"
alternatively, parts overview
Attach on the battery plate D652 two
holder eyelets D456 with four countersunk
screws M3x8 025.
Advertisement
