Advertisement
Attach the right front canopy holder D619
on the same way with a lense screw
M3x10 989.
Attach the conroller platform D42 with four
countersunk screws M3x8 025. Therefore
place the holes in the connectors vertical.
The mounting wire can help to find the
vertical position.
Alternative controller plates (optional):
Hobbywing 120A LV V4 (6s): D434
Hobbywing 130A HV V4 (7-12s): D435
Four landing bow holders D627 are at-
tached at the lower frame with eight hex
bolts M3x6 D196 using Loctite.
Parts overview of the landing gear with
carbon skid plates. (alternatively).
Advertisement
