Advertisement
For the shown point use again a hex bolt
M3x8 D197 and a lock nut M3 008s ...
... and also this shown point will be con-
nected with a hex bolt M3x8 D197 and a
lock nut M3 008s. Attach the delrin con-
nectors D626 after that to make the tighte-
ning of the screws easy.
Add the remaining four delrin connectors
D626 with four hex bolts M3x10 D328. It
is recommended to tighten the connectors
at this point only as far as they can be still
turned a little bit. So the later mount of
controller and battery plate will be easier.
Attach the lower right frame D625 and
check all holes for corresponding.
Advertisement
