Advertisement
The cable of the tailservo is pushed into
the left slot of the gyro plate D621. There-
fore it is eventually necessary to remove
the front threaded block D23a.
The tailservo is attached in the tailservo
slot of the upper left frame D601 with two
hex bolts M3x16 D329 using Loctite.
Bag 7: Rotorhead
Parts overview
Thr mainrotor hub cap 580 ist attached on
the mainrotor hub D452 with four lense
screws M3x6 D199. The spindle bushes
D453 are already factory attached.
Advertisement
