Advertisement
Bag 2: First stage shaft
Parts overview
Push the freewheel hub D509 from the „X"
marked side in the first stage gearwheel
D611 and check mounting holes for corre-
sponding.
Add four washers M3 002 on four hex
lense screws M3x8 D199 and attach
Loctite to the therads, screw them into the
holes and tighten the screws crosswise.
Push the belt wheel D610 on the pinion
shaft D609 upto the end. First add now
a grub screw M4x5 035 with Loctite on
the area of the shaft with the flat spot and
tighten it. Then add a second grub screw
M4x5 035 in the second threaded hole
with Loctite and tighten it. Finally add a
washer shim 10x16x0,2 033.
Advertisement
