Siemens SINUMERIK 840DE sl Commissioning Manual page 307

Procedure
14.5 Editing the machine model
Functions are available in the tree view of the graphic editor, similar to those in the program
editor; these simplify creating and editing a machine model.
Procedure
Copying/cutting/pasting elements
If you want to create a kinematic or protection area element that is similar to an already existing
element, then you can save time if you copy the element and insert it at a different position.
You have the option, for example of also copying inactive subtrees into the active tree.
Copying/cutting and pasting elements
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
1. Select the "Start-up" operating area.
2. Press the softkeys "NC" and "Machine model".
The "Tree" window opens.
The "Tree" window opens.
The following folders are available in the tree view:
● Active data
● Examples
● Network/USB
3. Press the "Graphic" softkey in order to use the graphic view.
The "Graphic" window opens in the right half of the editor.
The machine model created in the tree view is displayed in three dimen‐
sions.
4. By pressing the active softkey "Graphic" or "Tree" again, you display the
graphic view or the tree view.
1. Position the cursor on the desired element.
2. Press the "Copy" softkey.
- OR -
Press the "Cut" softkey.
3. Position the cursor at the required position and press the "Paste" softkey.
Collision avoidance
14.5 Editing the machine model
293