Siemens SINUMERIK 840DE sl Commissioning Manual page 442

Service and diagnostics
18.5 Machine identity
Machine information
Entries
Machine No.
Machine name
Machine type
Address information
Under Addresses you can enter the following data for the manufacturer/manufacturer's
regional office, dealer and end customer:
● Customer number
● Manufacturer name and, if required, Branch name / Dealer name / End user name
● Street, Postal code/ZIP code, Location, Country (can be selected from a selection list),
Region/State
● Address of contact: Name, Phone, Fax, E-mail, URL
18.5.1 Entering machine-specific information
Preconditions
You must have the following access rights to be able to enter or change machine-specific
information.
428
Meaning
The unique machine number (serial number of the CompactFlash card) is dis‐
played in the header. This number serves as information only and cannot be
changed.
The manufacturer assigns a unique machine number in this field which is stored
in machine data MD17400 $MN_OEM_GLOBAL_INFO.
Note: The machine name is a mandatory field. No data can be stored until this
field is completed.
Machine type.
Access level 1 (manufacturer)
Access level 2 (service)
Access level 3 (user)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)