Siemens SINUMERIK 840DE sl Commissioning Manual page 522

Technologies and cycles
21.2 Technology cycles for drilling
Additional settings
MD52005 $MCS_DISP_PLANE_MILL
= 0
= 17
= 18
= 19
MD52006 $MCS_DISP_PLANE_TURN
= 18
MD52212 $MCS_FUNCTION_MASK_TECH
Bit 0
Bit 1
MD52240 $MCS_NAME_TOOL_CHANGE_PROG
= Program name
See also
Technology cycles for swiveling (Page 558)
21.2 Technology cycles for drilling
Drilling technology
You can set drilling technology using the following channel-specific configuration machine data
and channel-specific cycle setting data.
MD52216 $MCS_FUNCTION_MASK_DRILL
Bit 0
Bit 1
508
Milling: Plane selection in the cycle support when programming under "programGUIDE G
code"
G17 plane (default value)
G18 plane
G19 plane
G18 plane (permanently set)
Enable swivel
= 0 Swivel plane, swivel tool not enabled
= 1 Swivel plane, swivel tool enabled
No optimized travel along software limit switches
= 0 No optimized travel along software limit switches
= 1 Optimized travel along software limit switches
The associated program is called for tool change.
Tapping cycle CYCLE84, technology input fields
= 0 Hide input fields
= 1 Display input fields
Tapping cycle CYCLE840, technology input fields
= 0 Hide input fields
= 1 Display input fields
Plane selection G17, G18, G19
Plane selection G17, G18, G19
Cross-technology function screen
Tool change program for G code steps
Drilling function screen form
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)