Left Control Panel View - Dell EMC PowerEdge XR2 Installation And Service Manual

Left control panel view

Figure 3. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 2. Left control panel
Item Indicator, button, or
connector
1 Status LED indicators
2 System health and system
ID indicator
3 iDRAC Quick Sync 2
wireless indicator (optional)
NOTE:
Sync 2 wireless
indicator is available
only on certain
configurations.
Status LED indicators
NOTE: The indicators display solid amber if any error occurs.
Table 3. Status LED indicators and descriptions
Icon Description
Drive indicator
10 Dell EMC PowerEdge XR2 overview
Icon
N/A
iDRAC Quick
Condition
The indicator turns solid amber if
there is a drive error.
Description
Indicate the status of the system. For more information, see the
Status LED indicators section.
Indicates the system health. For more information, see the System
health and system ID indicator codes section.
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can also
launch the virtual Keyboard, Video, and Mouse (KVM) viewer and
virtual Kernel based Virtual Machine (KVM), on a supported mobile
device. For more information, see the Integrated Dell Remote Access
Controller User's Guide at Dell.com/idracmanuals.
Corrective action
• Check the System Event Log to determine if the drive
has an error.
• Run the appropriate Online Diagnostics test. Restart
the system and run embedded diagnostics (ePSA).