Left Control Panel View - Dell EMC PowerEdge R7425 Technical Manual

Left control panel view

Figure 7. Left control panel without optional iDRAC Quick Sync 2.0 indicator
Figure 8. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 6. Left control panel
Item Indicator, button, or
connector
1 Status LED indicators
2 System health and system
ID indicator
3 iDRAC Quick Sync 2
wireless indicator
(optional)
Status LED indicators
NOTE: The indicators display solid amber if any error occurs.
Table 7. Status LED indicators and descriptions
Icon Description
Drive indicator
Icon
N/A
Condition
The indicator turns solid amber if
there is a drive error.
Description
Indicate the status of the system. For more information, see the
Status LED indicators section.
Indicates the system health. For more information, see the
System health and system ID indicator codes section.
Indicates if the iDRAC Quick Sync 2 wireless option is activated.
The Quick Sync 2 feature allows management of the system
using mobile devices. This feature aggregates hardware/firmware
inventory and various system level diagnostic/error information
that can be used in troubleshooting the system. You can access
system inventory, Dell Lifecycle Controller logs or system logs,
system health status, and also configure iDRAC, BIOS, and
networking parameters. You can also launch the virtual Keyboard,
Video, and Mouse (KVM) viewer and virtual Kernel based Virtual
Machine (KVM), on a supported mobile device. For more
information, see the Integrated Dell Remote Access Controller
User's Guide at Dell.com/idracmanuals.
Corrective action
• Check the System Event Log to determine if the
drive has an error.
15