Table of Contents
Advertisement
Left control panel view
Figure 4. Left control panel without optional iDRAC Quick Sync 2.0 indicator
Figure 5. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 4. Left control panel
Item
Indicator, button, or
connector
1
Status LED indicators
2
System health and system ID
indicator
3
iDRAC Quick Sync 2 wireless
indicator (optional)
NOTE:
For more information about the indicator codes, see the
Icon
Description
N/A
Indicates the status of the system. For more information, see the
indicators
section.
Indicates the system health. For more information, see the
system ID indicator codes
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The Quick Sync 2
feature allows management of the system using mobile devices. This feature
aggregates hardware/firmware inventory and various system level diagnostic/error
information that can be used in troubleshooting the system. You can access
system inventory, Dell Lifecycle Controller logs or system logs, system health
status, and also configure iDRAC, BIOS, and networking parameters. You can also
launch the virtual Keyboard, Video, and Mouse (KVM) viewer and virtual Kernel
based Virtual Machine (KVM), on a supported mobile device. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
poweredgemanuals
section.
System diagnostics and indicator codes
PowerEdge R6515 system overview
Status LED
System health and
www.dell.com/
section.
11
Advertisement
Table of Contents
