Modbus Plus Interface (Option G21); Modbus Rtu Slave Interface (Option G22); Devicenet Interface (Option G23); Control Net Interface (Option G26) - Siemens SINAMICS PERFECT HARMONY GH150 6SL3826 Operating Instructions Manual

Description
3.8 Options
3.8.11

Modbus Plus interface (option G21)

Using the Anybus X-Gateway communication module, the converter can be connected to the
Modbus Plus third-party bus system.
3.8.12

Modbus RTU Slave interface (option G22)

Using the Anybus X-Gateway communication module, the converter can be connected to the
Modbus RTU third-party bus system.
3.8.13

DeviceNet interface (option G23)

Using the Anybus X-Gateway communication module, the converter can be connected to the
DeviceNet third-party bus system.
3.8.14

Control Net interface (option G26)

The Anybus X-Gateway communication module allows a connection to be made with the
Control Net third-party bus system.
3.8.15

Modbus Ethernet interface (option G28)

The CBE20 communication module allows a connection to be made with the Modbus Ethernet
third-party bus system.
3.8.16

Ethernet connection in the door (option G47)

With this option, an Ethernet connection is installed in the Control Module door. This means that
a connection can be established to the Control Unit with the door closed.
3.8.17

1x temperature sensor evaluation unit TM150 (option G51)

This option comprises a temperature sensor evaluation unit TM150.
3.8.18

2x temperature sensor evaluation units TM150 (option G52)

This option comprises two temperature sensor evaluation units TM150.
46
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020