Cardio User Programs - Landice L10 Owner's Manual

3.5.

Cardio User Programs

Cardio treadmills can store up to 5 individual, modifiable user-
defined program profiles.
A user-defined program looks and runs exactly like a built-in
program, but it can be customized to suit the user. Unlike the
built-in programs, user-defined programs allow editing of
individual segments as well as the number of segments.
1. Press the button below PROGRAMS to display the
Programs selection screen.
2. Scroll through the program options by pressing
PROGRAMS or use the arrow keys. When USER
PROGRAM PREVIEW is shown, press ENTER.
3. Press ENTER or wait 3 seconds. The screen displays
PRESS START TO BEGIN OR EDIT TO SET UP.
4. Press EDIT. EDIT MODE
requires a time for segment
1 (area in bold).
Note: Press SWITCH FOCUS to toggle between speed, incline
and time values for the current segment. To change
segments, press NEXT SEGMENT or PREVIOUS
SEGMENT. You can change segments in either the forward
or reverse direction.
5. Use the numeric keypad to change the value and press
SWITCH FOCUS. Continue to another segment by
pressing the next or previous segment keys.
6. If you want a program to have less than 20 segments,
create the last segment with 0 in the time field. The time
reads END. The program ends when it reaches this
segment.
7. When you finish editing your User-Defined Program, you
can begin your program by pressing START or DONE.
Cardio Treadmill Operation
43