Hidden Menus - Landice L10 Owner's Manual

Maintenance and Troubleshooting
4.4.

Hidden Menus

The Hidden Menus provide access to control the settings listed
below.To view the Hidden Menus press 3, 9 and START at the
same time while the control panel is off.
Use the + or - keys to move up and down the list. Then press
the START button to select setting. Press STOP to save and
exit the Hidden Menus section.
• Error Logs: Records the number of times a specific error
code occurs.
• NV Init - Boot: Manufacturer's use ONLY
• Diagnostics: Provide technicians the ability to test buttons
and calibrate. Press and hold STOP to exit diagnostic mode.
• Reprogram Firmware: Manufacturer's use ONLY
• Self-Diagnostics: Runs an automatic test of specific
components to assist service technicians with diagnostics.
• Toggle Max Speed: Allows the maximum speed to be
adjusted to 12.5 mph for 110 volt and 15.5 for 220 volt
treadmills.
• Toggle Lockout Mode: Enables or disables use of a code to
operate the treadmill. When Lockout Mode is enabled it
provides the ability to set a personalized four-digit code to
use the treadmill. If the code is forgotten, 9010 will grant
access.
• Toggle Units: Allows the measurement of units to switch
between English and Metric.
• Toggle Beeper: Enables or disables the ability to control the
beeping sound.
• Toggle User Presence: This feature will turn off the treadmill
if a user is not detected on the treadmill for 20 to 30 seconds.
52