User Programs - Landice Pro Sports Trainer Quick User Manual

The Pro Sports Trainer has storage capacity for two User program profiles, which you can create and change. The treadmill
will remember these programs even if you unplug it from the wall. Each of the two User program profiles will be pre-loaded
with copies of the first two built-in programs, until you use and change these programs.
As you use the User programs, simply make speed and elevation changes to suit your needs. The Pro Sports Trainer will
remember your changes via its Learn mode. Effort levels do not apply here so there is no need to enter a maximum speed,
only time.
Follow these steps to use a USER program:
SELECT PROGRAM
By pressing the PROGRAMS button you can select one of two USER programs. Continue to press the
PROGRAMS button to scroll through both USER programs. Once you have selected the program of your
PROGRAMS
choice simply stop pressing the program button and wait three seconds. The display will now ask you to
enter the program parameters.
SELECT PROGRAM TIME
Using the DISPLAY button select a Program Time from 10-99 min. This will scale the 20 segments of the
DISPLAY
program equally throughout your selected time. Select your time and press the START button.
START
Press the START
The display will show program time counting
down from the selected time. You can use the
time display to gauge where you are in the
program at any given time. Any changes made
during each segment will be remembered by
the Pro Sports Trainer.

User Programs

button.
10