Learn Mode - Landice L10 Owner's Manual

Cardio Treadmill Operation
Note: If you attempt to advance the cursor past the 20th
segment, you are prompted with PRESS START TO BEGIN
OR EDIT TO SET UP. You can also exit Edit Mode by
pressing MANUAL MODE or PROGRAMS at any time.

3.5.1. Learn Mode

When you run a User-Defined Program and the speed or
incline is adjusted, the treadmill saves the last change to the
current segment.
Note: Learn Mode allows you to adjust existing segments in your
user program, but you cannot add segments to it in Learn
Mode.
1. Start a workout, then press PROGRAMS to display the
Programs selection screen.
2. Scroll through the program options by pressing
PROGRAMS or use the arrow keys. When the USER
PROGRAM PREVIEW you desire is shown, press ENTER.
3. Press START to begin your program. When you begin, the
Program Progress Detail screen is displayed. The speed
and incline values of your current segment are displayed in
the center. To change the speed or incline of your current
segment, press the SPEED (+/–) or INCLINE (+/–) keys.
The modified segment is stored with these new settings for
the next time you run this program.
44