User Programs - Edit Mode - Landice Executive Trainer Owner's Manual

The Executive Trainer has storage capacity for five User Programs, which you can create and change. The treadmill will
remember these programs even if you unplug it from the wall.
A User Program looks and runs exactly the same as a Built-In Program. The primary difference between Built-In
Programs and User Programs is customization. Unlike the Built-in Programs, User Programs allow you to manually edit
individual segments.
To Edit a User Program:
When you have completed editing your User Program, press BACK to view the Program Preview with the updated changes
that you have made.
If you are content with your changes, press START to begin the User Program. Your newly modified User Program will be
permanently stored in Executive Trainer's memory even if the treadmill is unplugged.
11

User Programs - Edit Mode

Press Menu -> Programs -> USER PROGRAMS -> USER 1 -> EDIT
You will be prompted with the option to EDIT or AUTO PROGRAM.
Select EDIT to enter EDIT MODE.
When you first enter EDIT MODE, you default to a detailed view of
the 1st segment of the User Program.
Using the designated "+/-" keys or the numeric keypad, you can
modify the 1st segment's length, speed, and grade.
Press NEXT SEGMENT to view the 2nd segment in detail.
To view other segments, use the designated "NEXT/PREVIOUS
SEGMENT" keys to navigate through the entire 3-segment program.
When you finish modifying your User Program, press BACK to
preview your modified program.
EXAMPLE:
If you want to modify your user program to be more than 3 segments
(up to 20), follow these steps.
To make a 3 Segment User Program 4 segments:
1. After modifying segments 1, 2, and 3 to your liking, advance to
Segment 4.
2. Notice that the time is set to END. This is an indication that this
segment is inactive because the time has been set to 0:00.
3. To activate the segment, simply set a time along with a desired
speed and grade for that segment.