Multiple Projector Operation - Christie Roadie HD+35K Setup Manual

2.2.1 Multiple Projector Operation

Repeat Section 2.2 Quick Setup
recommends that the units MUST NOT be operated until the installation has been verified as correctly
connected. Use this diagram to determine if the connections between the projector head and LPS are correct:
Roadie HD+35K Setup Guide
020-100394-06 Rev. 1 (10-2013)
Fire Hazard! To avoid a fire hazard for multiple projector operation, make sure
the high current DC Leads and interlocks/control cables are correctly
connected between the Lamp Power Supply (LPS) and its corresponding
projector. DO NOT cross-connect one set of cables from one LPS to a second
projector.
for each additional projector in multiple projector operations. Christie
Section 2: Installation and Setup
2-7