Ypbpr Signals (Component Video); Composite Video - Christie Roadie HD+35K Setup Manual

2.5.2 YPbPr Signals (Component Video)

Connect a YPbPr signal (component video) to INPUT 1
or INPUT 2, as shown.
NOTES: 1) If, for some reason, the projector fails to
recognize a YPbPr signal, specify this Color Space option
within the Image Settings menu. See Section 3.6.3 Image
Settings Menu in the Roadie HD+35K User Manual. 2)
Do not connect digital component signals (known as
YCbCr) to INPUT 1 or INPUT 2. Use the appropriate
optional digital interface installed in INPUT 5 or 6 only.

2.5.3 Composite Video

INPUT 3 and INPUT 4 provide simultaneous connection
of both a composite video source (INPUT 3 and an S-
Video source (INPUT 4). See
NOTE: Unlike previous Christie projectors, composite
video and S-Video cannot connect to any other locations
on the input panel. Connect as shown in
Roadie HD+35K Setup Guide
020-100394-06 Rev. 1 (10-2013)
.
Figure 2-13.
Figure 2-13.
Section 2: Installation and Setup
2-19