Control Panel (Rear Of Projector) - Christie Roadie HD+35K Setup Manual

Section 3: Operation
For China models, the projector breaker on the projector head rear panel serves two purposes:
1. It is a breaker/power switch for the Roadie HD+35K projector head.
2. It protects against over-current conditions of 10A or more.
The breakers/power switches must be ON in order to enable normal Roadie HD+35K system power-up and
operation. If faulty or major excessive AC is detected, the breakers "trip" to OFF in order to prevent damage.
Try switching the breakers/power switches ON again. If the breakers/power switches continues to trip OFF,
this indicates a major fault, and the AC problem must be resolved. Possible causes might include shorts,
damage to lamp cables, or very excessive AC.
NOTE: You must press POWER on the built-in keypad as the breaker/power switch do not power up the
projector or start the lamp.
The internal ballast fan indicates whether or not both (Main and Lamp) breakers/power switches are ON. There
is no other indicator. When the main ballast breaker is ON, lights on the ballast indicate only that the ballast is
plugged in.

3.1.3 Control Panel (Rear of Projector)

The rear control panel includes the built-in keypad, IR sensor, 2-digit status/error code display window, and the
LCD status display, as described in
Table 3.1 Rear Projector Control Panel
CONTROL PANEL AREA
Built-In Keypad
IR Sensor
Two-Digit Status/Error Code
Window
LCD Status Display
3-2
Table 3.1.
P
ROVIDES ACCESS TO ALL SOFTWARE CONTROLS NEEDED FOR WORKING WITH THE
. F
PROJECTOR OR MORE CONVENIENT FUNCTIONALITY
,
BROWSER OR A SERIAL MESSAGE
S
ENSORS AT THE FRONT AND REAR OF THE PROJECTOR DETECT COMMANDS FROM
IR
THE STANDARD REMOTE
T
HE CODE THAT DISPLAYS IN THIS WINDOW INDICATES THE BASIC OPERATIONAL
. E
STATE OF THE PROJECTOR
ERROR MESSAGE AND DISPLAYS IT IN THE
Section 3.4.1 System Warnings/Errors
S
EE
F
ULL STATUS AND ERROR MESSAGES APPEAR IN THIS WINDOW
DESCRIPTION
,
-
BASED METHOD OF CONTROL
.
ACH CODE REFERENCES ITS CORRESPONDING STATUS
LCD Status Display
.
,
YOU CAN USE A REMOTE WEB
.
.
WINDOW
.
Roadie HD+35K Setup Guide
020-100394-06 Rev. 1 (10-2013)
/