Christie Roadie HD+35K Setup Manual page 21

5. Install the projection lens and secure it with the safety ring and tether strap as described in
Installing Lens, Lamp, and
Roadie HD+35K Setup Guide
020-100394-06 Rev. 1 (10-2013)
Cooling.
Figure 2-5 Securing Clamps to Projection Head
1) A minimum of 4 rigging clamps are required for a single projector. 2)
Always use redundant safety straps/cables. 3) Observe load ratings and all
local applicable codes.
Figure 2-6 Rigging Zones on Projector Handles
Section 2: Installation and Setup
Section 2.4
2-11