Otto Bock 16X14 Instructions For Use Manual page 14

Careful handling of the prosthesis and its components not only increases
their service life but, above all, ensures the patient's safety!
Should prosthetic components be subjected to unusual stresses (such
as a fall), immediately contact your prosthetist and have the components
inspected for any damage. If necessary, the responsible prosthetist will
pass the prosthesis on to the Ottobock Service.
NOTICE
Risk of corrosion. Prosthetic components must not be exposed to cor-
rosive elements such as fresh water, salt water and acids.
Using this medical product in such environmental conditions will render
all claims against Otto Bock HealthCare null and void.
NOTICE
Damage due to incorrect environmental conditions. Prosthetic compo-
nents must not be subjected to intense smoke, dust, vibrations, shocks
or high temperatures. Do not allow debris or liquids to get into the pros-
thesis and its components. Failure to follow these instructions can lead
to malfunctioning and damage of the prosthesis.
NOTICE
Damage caused by improper cleaning agents. Do not use any ag-
gressive cleaning agents since they could cause damage to bearings,
seals and plastic parts. The product may only be cleaned with a damp
piece of cloth and neutral soap.
2.4 Function
16X12
The 16X12 Elbow Joint Bars consist of the 16X13 Elbow Joint Bar with
Cable Lock and 16X14 Elbow Joint Bar without Lock.
The joint bars are made of stainless steel of a flat profile and can be used
on both sides.
14 | Ottobock