H.323 Phone Codec Information Basic Setup; Description - NEC Aspire Series Networking Manual

84-12 : H.323 Phone CODEC Information Basic Setup

84-12 : H.323 Phone CODEC Information Basic Setup
Level:
IN

Description

Input Data
Item
No.
01 G711 Audio Frame
Prior to software 2.63, the only entry possible was "2"
or "3". With software 2.63+, additional entries are
available.
Note: Currently, only the Aspire S system can use the
10ms setting. Aspire will provide this option in the
future.
G711 VAD Mode
02
G711 Type
03
G.711 Jitter Buffer Min
04
05 G.711 Jitter Buffer Type
06 G.711 Jitter Buffer Max
07 G.729 Audio Frame
Prior to software 2.63, only entries 3-8 were available.
With software 2.63+, additional entries are available.
Note: Currently, only the Aspire S system can use the
10ms setting. Aspire will provide this option in the
future
G.729 VAD Mode
08
G.729 Jitter Buffer Min
09
10 G.729 Jitter Buffer Type
11 G.729 Jitter Buffer Max
Networking
Aspire S
• Available.
• Item 31 available with software 2.63+.
• Item 32 available with software 4.93+
Use Program 84-12 : H.323 Phone CODEC Information Basic Setup to setup the CODEC
information of H.323 phones and IP Networking. Refer to Program 84-01 for H.323 trunk
CODECs.
Item
Programming
Aspire M/L/XL
• Available.
• Item 31 available with software 2.63+.
• Item 32 available with software 4.93+
Input Data Default
1 - 3 3
(1 = 10ms,
2 = 20 ms,
3 = 30ms)
0 = Disable 0
1 = Enable
0 = A-law 1
1 = μ-law
0~145 ms 30
0~145 ms 60
0~145 ms 120
1-8 3
(1 = 10ms,
2 = 20ms, etc.)
0 = Disable 0
1 = Enable
0~500 ms 30
0~500 ms 60
0~500 ms 120
Related
Program
◆ 233