Programming Names And Text Messages - NEC Aspire Series Networking Manual

Programming
Programming Basics

Programming Names and Text Messages

Use this keypad digit . . .
1
2
3
4
5
6
7
8
9
0
*
Soft Key Left/Right
Arrows
CONF
CLEAR
106 ◆
Several programs (e.g., Program 20-16: Selectable Display Messages) require you to enter text. Use
the following chart when entering and editing text. When using the keypad digits, press the key once
for the Þrst character, twice for the second character, etc. For example, to enter a C, press key "2"
three times. Press the key six times display the lower case letter. The name can be up to 12 digits
long.
With Software Prior to 2.05:
Key for Entering Names
Enter characters:
1 @ [
Press repeatedly to scroll through the list. After selecting your entry, press the
next letter or use the left scroll or right scroll Soft Key to move the cursor.
Enter characters A-C, a-c, 2. After selecting your entry, press the next letter or
use the left scroll or right scroll Soft Key to move the cursor.
Enter characters D-F, d-f, 3. After selecting your entry, press the next letter or
use the left scroll or right scroll Soft Key to move the cursor.
Enter characters G-I, g-i, 4. After selecting your entry, press the next letter or use
the left scroll or right scroll Soft Key to move the cursor.
Enter characters J-L, j-l, 5. After selecting your entry, press the next letter or use
the left scroll or right scroll Soft Key to move the cursor.
Enter characters M-O, m-o, 6. After selecting your entry, press the next letter or
use the left scroll or right scroll Soft Key to move the cursor.
Enter characters P-S, p-s, 7. After selecting your entry, press the next letter or
use the left scroll or right scroll Soft Key to move the cursor.
Enter characters T-V, t-v, 8. After selecting your entry, press the next letter or use
the left scroll or right scroll Soft Key to move the cursor.
Enter characters W-Z, w-z, 9. After selecting your entry, press the next letter or
use the left scroll or right scroll Soft Key to move the cursor.
Enter characters:
0 ! "
Press repeatedly to scroll through the list. After selecting your entry, press the
next letter or use the left scroll or right scroll Soft Key to move the cursor.
Enter characters:
* + ,
Press repeatedly to scroll through the list. After selecting your entry, press the
next letter or use the left scroll or right scroll Soft Key to move the cursor.
Accepts an entry (only required if two letters on the same key are needed - ex: TOM)
and moves cursor in the arrows direction.
Clear the character entry one character at a time.
Clear all the entries from the point of the ßashing cursor and to the right.
When you want to. . .
¥ ] ^ _ ' {
# $ % & ' (
- . / : ; < =
← ← ← ← → → → →
| }
)
> ?
Networking